Checking, canceling or changing programme settings

ADisengage timer recording standby mode

Press #, then press 1.

When “AUTO TIMER” is set to “ON” ( 12), press only 1.

B Access Program Check screen

Press ".

C Access Program screen

Press " again. Each time you press ", the next programme’s screen appears.

D Cancel or change programme setting

To cancel a programme, press &.

To change a programme, press the

appropriate button: START+/–, STOP+/–,

DATE+/–,DAILY (number key “8”), WEEKLY (number key “9”), PR+/–,VPS/PDC (number key “7”) and/or SP/LP (p).

To change “TV PROG” to “SAT” for the channel position, press the number key “0”.

EReturn to normal screen

Press " repeatedly until no Program screen is shown.

FRe-engage timer recording standby mode

Press #. The recorder turns off automatically and “#” is displayed on the display panel.

When “AUTO TIMER” is set to “ON” ( 12), the timer recording standby mode automatically resumes when you turn off the recorder.

Automatic Satellite Programme Recording

You can automatically record a satellite programme which is timer-programmed on your satellite receiver.

AConnect a satellite receiver to the L-2 IN/DECODER connector on the rear panel.

BSet timer programme on satellite receiver referring to its instruction manual.

CLoad a cassette with the record safety tab intact.

DSet “L-2 SELECT” to “A/V” or “SAT”. ( 13)

ETo set the tape speed, press SP/LP (p). The current setting for the tape speed appears on the display panel or the screen for about 5 seconds. Press SP/LP (p) again to change the setting while tape speed is displayed.

FPress SAT# for more than 2 seconds. The recorder turns off automatically and enter the Automatic Satellite Programme Recording mode (the SAT# indicator lights up). When signals come into the recorder from the satellite receiver, the recorder starts recording (the SAT# indicator blinks). The recorder stops recording and turns off when signals stop coming in.

NOTES:

Be sure not to turn on the satellite receiver before the programme starts broadcasting; otherwise, the recorder starts recording when the satellite receiver is turned on.

To disengage the Automatic Satellite Programme Recording mode, press SAT# (the SAT# indicator goes off).

Depending on the type of satellite receiver, Automatic Satellite Programme Recording may not be compatible.

B.E.S.T. does not work in the Automatic Satellite Programme Recording mode.

Power Save mode does not work in the Automatic Satellite Programme Recording mode.

Just Clock does not work in the Automatic Satellite Programme Recording mode.

— 10 —

Page 10
Image 10
JVC HR-J691EU, HR-J693EU, HR-J694EU specifications Checking, canceling or changing programme settings