Page 7 May 7, 2004 1:51 pm
—7—
Display On/Off Setting
You can reduce the power consumption while the VCR is turned
off (in standby mode) or during timer recording standby mode. To
use this function, set the “DISPLAY ON/OFF SET” to “OFF”. Turn
off the VCR by pressing the 1 button on the VCR only.
AAccess Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press rt to
move the highlight bar (arrow) to “INITIAL
SET”, then press OK or e.
BAccess Display On/Off Set screen
Press rt to move the highlight bar
(arrow) to “DISPLAY ON/OFF SET”, then
press OK or e.
CSelect Display On/Off
Press rt to move the highlight bar
(arrow) to “ON” or “OFF”, then press OK
or e.
During standby mode,
ON - The clock display on the display
panel turns dimmer (default setting).
OFF - The clock display on the display panel disappears.
DPress MENU to return to normal screen.
NOTES:
●If the “DISPLAY ON/OFF SET” is set to “OFF” and you are in the
timer recording standby mode, (墌pg. 11), press 1 on the
VCR to make the clock display disappear. (Only “#” is
displayed). Press 1 again on the VCR to make the clock
display reappear. The above operation does not work if you set
“AUTO TIME R” to “ON” (墌pg. 13).
●The “display off” mode does not work if you turn off the VCR by
pressing the 1 button on the remote control.
Tuner Setting

Setting channels automatically

— Auto Channel Set

Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
AAccess Main Menu screen, then Tuner

Set screen

Press MENU on the Remote. Press rt to
move the highlight bar (arrow) to “TUNER
SET”, then press OK or e.
BPerform Auto Channel Set
Press rt to move the highlight bar
(arrow) to “AUTO CHANNEL SET”, then
press OK or e. The VCR selects the correct
band (TV or CATV) automatically during
Auto Channel Set.
●When Auto Channel Set is complete,
“SCAN COMPLETED” appears on
screen.
●If the scan was unsuccessful, “SCAN
COMPLETED–NO SIGNAL–” appears
on screen. Check the connections and
start again.
Press MENU to return to normal screen.

Setting channels manually

— Manual Channel Set

You can add the channels you want or delete the channels you do
not want manually.
AAccess Main Menu screen, then Tuner

Set screen

Press MENU on the Remote. Press rt to
move the highlight bar (arrow) to “TUNER
SET”, then press OK or e.
BAccess Manual Channel Set screen
Press rt to move the highlight bar
(arrow) to “MANUAL CHANNEL SET”,
then press OK or e.
CAdd or skip desired channels
To add channels
APress the Number keys on the Remote
to input a channel number you want to
add.
BPress OK or e to set to “ADD”.
CRepeat A to B to add other channels.
Press MENU to return to normal screen.
To skip channels
APress rt or the Number keys to select a channel number you
want to skip.
BPress OK or e to set to “SKIP”.
CRepeat A and B to skip other channels. Press MENU to return
to normal screen.
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
DISPLAY ON/OFF SET
DISPLAY ON/OFF SET
ON
OFF
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Turn on the VCR and TV, and select the VCR channel (or AV
mode).
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
❚
❚
❚
❚
❚
– –––––––––––––
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
PRESS NUMBER KEY (0–9)
OR ( , ), THEN (OK)
PRESS (MENU) TO END

– Initial Settings –

HR-J7020UM_EN.fm Page 7 Friday, May 7, 2004 1:52 PM