JVC HR-J755EK setup guide Video Plus+ Timer Programming

12BASICOPERATIONS (cont.)

Video Plus+

Timer

Programming

Before performing Video Plus+ Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

– –:– –

With Video Plus+, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

ACCESS VIDEO PLUS+ SCREEN

1	Press PROG.	VIDEO PLUS+
		[0 – 9] =
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

The front display panel looks like this:

ENTER PLUSCODE NUMBER

Press the NUMBER keys to	VIDEO PLUS+
enter the PlusCode
	1 2 3 4 5 6 7 8
2 number of the programme
you wish to record.

2

NUMBER

5 PDC

STOP+/–

1,6 PROG

1

4

7

1

2	DAILY
	3

2

5 6

8 9 WEEKLY

0 4 7

SP/LP 4

●If you make a mistake, press and input the

correct number.	[0 – 9] =
	[ ] : DELETE
	[PROG] : EXIT

The PlusCode number you enter appears on the front display panel:

The display panel shows only a 4-digit number.

ACCESS VIDEO PLUS+ PROGRAM SCREEN

Press OK, and the Video		– P1 –
Plus+ Program screen	VIDEO PLUS+ 123456789
3 appears (if you’re just	START	STOP

3 OK 3,6

starting out, “P1” appears).		21:00		= 22:00
			SP	VPS/PDC OFF
The display panel shows the			DATE		TV PROG
programme start time.		25.12		1
Pressing	changes the				BBC 1
display to the programme			: OK
stop time, then the date and
preset position.
			SP

IMPORTANT

Make sure the preset position number you wish to record is displayed; if not, see "Video Plus+ Setup" on page 44 and set the Guide Program number for that PlusCode number correctly.

●If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid PlusCode number.

●If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 13.