Recording |
| Karaoke features |
Use the following procedure to record TV programmes on a blank video tape.
Before proceeding:
∙To record TV programmes, the video cassette player must be connected to the TV as shown in connection B of the “Connections” section.
∙Turn on the power of the TV and video cassette player.
∙Make sure that the video cassette’s safety tab is intact. If it has been removed, cover the hole with adhesive tape.
|
| 1 |
| REMOTE CONTROL UNIT |
| ||
|
|
| TV/VCR | VIDEO |
|
| |
|
|
|
|
|
| ||
|
|
| AUTO | - TRACKING + | 3 | ||
|
|
|
|
|
|
| |
|
|
|
| - TV CH + |
|
| |
MIC | DIGITAL ECHO | NTSC | - VOLUME + | TV/VCR |
| ||
PLAYBACK |
| ||||||
SP/LP/EP |
|
| ON PAL TV |
|
|
|
|
| B.E.S.T | LP / EP |
|
|
|
| |
|
|
| NTSC |
|
|
|
|
|
| STANDBY / REC | 4.43 | B.E.S.T. |
|
|
|
MIN | MAX 0 | 10 | NTSC 3.58 |
| TV |
|
|
|
|
|
|
|
|
| |
2 |
|
|
| 3 |
|
|
|
1 Load a blank video tape. |
|
|
| ||||
2 Press SP/LP/EP button to set the recording speed. If LP or EP is selected, the LP/EP indicator will light.
3 Press the Record ¦ button to start recording. (On the remote control unit press the Record ¦ and Play 3 button at the same time.)
The recording indicator will light during recording.
7Press the Stop/Eject ¤button or the remote control’s Stop 7 button to stop recording.
To stop recording temporarily:
7Press the Pause 8 button. The recording indicator will blink.
Press the Play 3 button to resume recording.
Notes:
∙To engage recording standby, press the Record ¦ button and then press the Pause 8button. The recording indicator will blink during recording standby. Press the Play 3button again to start recording.
∙If the Record ¦ button does not work, check to see if the cassette safety tab has been removed.
∙The player automatically stops when
∙The video tape will be rewound automatically when the end of the tape is reached.
Karaoke (HR-JP400K only)
Use this feature to enjoy karaoke video. Connect a microphone to both MIC 1 and MIC 2 for duets.
1 Insert a
2 Press the PLAY 3 button.
3 Adjust the MIC volume as necessary.
4 Adjust the DIGITAL ECHO volume as necessary.
5 Start singing.
Note:
Check that the power is off (standby mode) before plugging in the microphone.
9
