JVC LPT0711-001B Subsidiary Settings, Colour System Set, Description/message, About Ntsc Playback

Subsidiary Settings

Player’s information (Self-Diagnosis)

This function allows you to check the status of the player and tape inserted into the player.

APress MENU to access Main Menu screen.

B Press w e to select the icon “VCR	VCR INFO
INFO”, then press OK.

CPress w e to select item to check the status, then the status message appears on the screen. Refer to the following table

below.

D Press MENU to return to normal screen.

Item	Description/message
HEAD STATUS	You can check the status of the player’s video
	head.
	OK: No problem
	PLEASE CLEAN: Clean the video heads using a
	dry cleaning cassette or be sure to contact
	your nearest JVC dealer.
TAPE STATUS	You can check the status of the tape inserted
	into the player.
	RECORDABLE: The cassette can be recorded.
	NOT RECORDABLE: Insert a cassette with the
	record safety tab intact, or cover the hole
	using adhesive tape.

Colour System Set

You can play back PAL, MESECAM and NTSC (3.58 or 4.43) tapes, or record PAL and MESECAM and NTSC (3.58 or 4.43) signals on this player. Select the appropriate colour system.

APress MENU to access Main Menu screen.

BPress w e to select the icon “SYSTEM”, then press OK.

CPress w e to select the appropriate

mode, then press OK.

D Press MENU to return to normal screen.

AUTO: Normally select this. The

appropriate colour system is selected SYSTEM automatically depending on the playback

or recording signals.

If “AUTO” does not work correctly, set the following mode manually.

PAL: To record PAL signals, or playback a PAL tape.

MESECAM: To record SECAM signals, or play back a MESECAM tape.

NTSC-PB: To play back a NTSC tape on PAL TV

NTSC3.58: To record NTSC3.58 signals, or play back a NTSC3.58 tape

NTSC4.43To record NTSC4.43 signals, or play back a NTSC4.43 tape

You can change the system setting as follows:

Source	Mode	System change
PAL/	Playback	AUTO{PAL{MESECAM
MESECAM	Recording	AUTO{PAL{MESECAM
NTSC	Playback	NTSC-PB{NTSC3.58{NTSC4.43
	Recording	NTSC3.58{NTSC4.43

NOTES:

●You can also perform SYSTEM setting by pressing COLOUR SYSTEM on the player.

About NTSC Playback

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen, or cut off the top and bottom portions of superimposed displays. This is not a malfunction.

●The picture may roll up and down. This can be corrected if your TV has the V-HOLD control function.

●The counter and tape remaining time readings will be incorrect.

●During search or still, the picture will be distorted, and there may be a loss of colour.

— 11 —