Masterpage:Right-NoTitle0
EN 37
Filename [HRS5950EU4-EN.fm]
Page 37 December 4, 2001 5:11 pm
* The default setting is bold in the table below.
8B.E.S.T.
ON
OFF
You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to
“ON” or “OFF” (墌pg.21).
8PICTURE CONTROL
AUTO
EDIT
SOFT
SHARP
This feature helps you to adjust the playback picture quality according to your
preference. Normally select “AUTO”.
AUTO
: Provides the optimised picture benefits of the B.E.S.T. Picture System.
EDIT
: Minimizes picture degradation during editing (recording and
playback).
SOFT
: Reduces image coarseness when viewing overplayed tapes
containing a lot of noise.
SHARP
: Clearer, sharper-edged picture when viewing images with lots of flat,
same-coloured surfaces such as cartoons.
NOTES:
●When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change until
you select another mode.
●When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish
dubbing the tapes.
●When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from
“AUTO” to “NORM”.
8AUTO TIMER
ON
OFF
When this function is set to “ON”, the timer is automatically engaged when the
recorder power is turned off, and automatically disengaged when the recorder
is powered back on.
NOTE:
For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are disabled
while the Timer mode is engaged. To disengage the timer, press # (TIMER).
8O.S.D.
ON
OFF
When this function is set to “ON”, various operational indicators appear on the
TV screen. Messages appear in the selected language (墌pg. 12, 13).
NOTES:
●When you use this recorder as the source player for editing, be sure to set “O.S.D.” to
“OFF” before starting.
●During playback, the operation mode indicators may be disturbed depending on the
type of tape being used.
HRS5950EU1-EN.book Page 37 Tuesday, December 4, 2001 5:32 PM