Masterpage:Right-NoTitle0
EN 33
Filename [HRS5950EU3-EN.fm]
Page 33 December 4, 2001 5:14 pm
Perfect Connections

This is an example of recommended connection if your

TV has two 21-pin AV input (SCART) connectors.

Connect the decoder to the satellite receiver’s connector

if you have a decoder, L-1 IN/OUT connector to TV’s

connector, and L-2 IN/DECODER connector to the

satellite receiver’s connector. Then connect the satellite

receiver and TV.

NOTES:
●Set “L-2 SELECT” to “A/V” (墌pg.31).
●To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key “0”) and/or PR so that
“L-2” appears on the front display panel.
●To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
●For details, refer to the instruction manual of the satellite
receiver and decoder.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
21-pin SCART
connector
Back of TV
ANT. IN
RF OUT
Aerial
connector
Decoder
Mains outlet
Back of recorder
HRS5950EU1-EN.book Page 33 Tuesday, December 4, 2001 5:32 PM