IP Camera 200 Series |
| Installation en 23 |
|
|
|
|
|
|
|
|
|
|
|
|
Set the camera to the desired position by performing the following steps:
1.For horizontal adjustment (pan), rotate the camera module in the base. Do not rotate more than 350°.
2.For vertical adjustment (tilt), loosen thumbscrews, position camera, then gently tighten thumbscrews to secure camera.
3.To obtain a horizontal horizon (for tilted ceilings or sidewall mounting), rotate the base of the lens as necessary to align the picture shown on the monitor. Do not rotate more than 340°.
Bosch Security Systems | Installation and Operation Manual |
