Bosch Appliances NDC-265-P operation manual Focal length and focus

24 en Installation IP Camera 200 Series

3.8.2Focal length and focus

Adjust the focal length and focus as follows:

1.Slide the focus aid onto the lens.

2.To set the field of view of the varifocal lens, loosen the focal length screw and turn the mechanism until the required view is displayed on the monitor (Image goes out of focus.)

3.Focus the image on the monitor by loosening the focus screw and turning the mechanism until the image is in focus.

4.Readjust the focal length if necessary.

5.Repeat these two adjustments until the desired view is in focus.

6.Tighten both screws.

7.Remove the focus aid from the lens.

1.Attach focus aid

2.Set focal length

3.Adjust focus

4.Remove focus aid

AR18-10-B012 v1.5 2011.01 Installation and Operation Manual Bosch Security Systems