Bosch Appliances NDC-265-P operation manual Installation, Disassembly

IP Camera 200 Series Installation en 15

3Installation

3.1Disassembly

The camera/housing unit consists of the following parts:

x2

1.Dome

2.Inner liner

3.Camera module and mounting base

To disassemble the unit proceed as follows:

1.Using the special screwdriver bit supplied, loosen the two tamper-resistant screws in the dome (the screws remain in place).

2.Remove the dome from the base.

3.Remove the inner liner by pulling it off the base.

Bosch Security Systems Installation and Operation Manual AR18-10-B012 v1.5 2011.01