Bosch Appliances NDC-265-P operation manual Power connection, DC power connection

18 en Installation IP Camera 200 Series

3.4Power connection

The camera can accept power from both the DC12V power input and the Ethernet input at the same time. You can remove either one of the power sources without interrupting camera operation.

3.4.1DC power connection

1 2 3 4 DC 12V Ethernet Line-out Line-in

Figure 3.3 DC power connection

1.Slide the plug adapter that matches your outlet socket onto the supplied power supply.

2.Insert the power connector jack from the power supply into the DC12V socket of the camera.

3.Connect the power supply to either a 230 VAC or a

120 VAC power supply outlet.

When power is supplied to the camera the LED on the bottom- front of the camera lights. (This LED can be disabled in the Installer menu.)

AR18-10-B012 v1.5 2011.01 Installation and Operation Manual Bosch Security Systems