74 en Advanced Mode | IP Camera 200 Series |
|
|
6.6.4VCA configuration - Scheduled
A scheduled configuration allows you to link a VCA profile with the days and times at which the video content analysis is to be active. Schedules can be defined for weekdays and for holidays.
Weekdays
Link any number of
1.Click the profile to link in the Time periods field.
2.Click in a field in the table, hold down the mouse button and drag the cursor over all the periods to be assigned to the selected profile.
3.Use the right mouse button to deselect any of the intervals.
4.Click Select All to link all time intervals to the selected profile.
5.Click Clear All to deselect all of the intervals.
6.When finished, click Set to save the settings in the device.
Holidays
Define holidays on which a profile should be active that are different to the standard weekly schedule.
1.Click the Holidays tab. Any days that have already been selected are shown in the table.
2.Click Add. A new window opens.
3.Select the desired date from the calendar. Select several consecutive calendar days by holding down the mouse button. These will later be displayed as a single entry in the table.
4.Click OK to accept the selection. The window closes.
5.Assign the individual holidays to the VCA profiles, as described above.
Deleting Holidays
Delete defined holidays at any time:
1.Click Delete. A new window opens.
2.Click the date to delete.
| Installation and Operation Manual | Bosch Security Systems |
