90 en Advanced Mode | IP Camera 200 Series |
|
|
6.9Service
Service
>Maintenance
>System Overview
6.9.1Maintenance
CAUTION!
Before starting a firmware update, make sure to select the correct upload file. Uploading the wrong files can result in the device no longer being addressable, requiring it to be replaced. Do not interrupt the firmware installation. Even changing to another page or closing the browser window leads to interruption. Interruption may lead to faulty coding of the Flash memory. This can result in the device no longer being addressable, requiring it to be replaced.
Firmware
The camera functions and parameters can be updated by uploading new firmware. To do this, the latest firmware package is transferred to the device via the network. The firmware is installed there automatically. Thus, a camera can be serviced and updated remotely without requiring a technician to make changes to the device on site. The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area.
To update the firmware:
1.First, store the firmware file on your hard disk.
2.Enter the full path for the firmware file in the field or click Browse to locate and select the file.
3.Click Upload to begin transferring the file to the device. The progress bar allows monitoring of the transfer.
The new firmware is unpacked and the Flash memory is reprogrammed. The time remaining is shown by the message going to reset Reconnecting in ... seconds. When the upload is completed successfully, the device reboots automatically.
Installation and Operation Manual | Bosch Security Systems |
