To stop or turn the power off while recording

Press s STOP on the remote control, Z STOP/EJECT on the VCR or POWER.

To extend the recording duration while recording

Press w REC/OTR until the new duration you want appears on the screen.

Tips

To confirm the remaining recording time on the TV screen, press CALL during One-Touch Recording.

You can also use the display window to check the recording duration time and confirm the remaining recording time.

Note

When the tape reaches the end during One-Touch Recording, “ ” flashes in the display window.

Setting the timer with VCR Plus+ system

You can greatly simplify timer recordings with VCR Plus+ system. Just enter the PlusCodes, a number assigned to each TV program, and the VCR will set the timer recording automatically. You can find PlusCodes in most TV guide magazines.

You can set up to 8 programs.

VCR/CATV/TV

VCR PLUS+

 

Number buttons

 

CANCEL

T-REC

SET/TRACKING

ENTER

+/–

MENU

Before starting

Check that the VCR clock is set correctly.

Check that the VCR channel numbers match the guide channels which are assigned to the TV stations.

Insert a cassette with its erasure prevention tab in place. Make sure the tape is longer than the recording time.

Set the VCR/CATV/TV selector to VCR.

Turn on the VCR and the TV and set the TV for VCR reception.

If the CATV converter is used for the timer recording, check that the CATV converter is turned on and the channel you want to record is selected.

1 Press VCR PLUS+.

2 Enter the PlusCode of the TV program you want to record using the number buttons.

If you make a mistake, press CANCEL.

CONTINUE

ENGLISH 22

Page 29
Image 29
Aiwa HV-FX8100U Setting the timer with VCR Plus+ system, To stop or turn the power off while recording