ENGLISH
Dubbing

Connecting with another VCR

Video camera
(Player)
To audio/video
output jacks

or

Operation

Before starting
Select the tape speed.
Insert a pre-recorded source cassette into
another (playback) VCR.
Insert a blank cassette with its erasure
prevention tab in place into your HV-FX8100
(recorder).
Press INPUT to display “L” in the display
window.
You can also use the CHANNEL N or M button on
the VCR and remote.
Press w REC/OTR and a PAUSE/STILL on the
recording VCR.
Set the other VCR to play back.
Press a PAUSE/STILL on the recording VCR.
1
2
3
4
5
HV-FX8100 (Recorder)
Audio/Video cable (not supplied)
To audio/video
output jacks
Another VCR (Player)
INPUT
w REC/OTR
Tips
•If the other VCR is a monaural type, connect one of the audio plugs only to AUDIO IN L (MONO).
•If you use this VCR for playback, connect the AUDIO/VIDEO OUT jacks on this VCR and the audio/video input jacks on the
recording VCR.
Note
If both units are turned on, made by AIWA and located near each other, do not use the remote control. Use the buttons on the
VCR instead.
26
Red
White
Yellow
VIDEO AUDIO IN jacks
Important
When you record a video signal output from this VCR onto another VCR, the indicators on the TV screen will be recorded on
the tape.
6
a PAUSE/STILL