|
|
|
|
| |
Symptom or error | FRU or action, in sequence | |
|
| |
2010 | Inform the following information to the | |
Warning: Your internal hard disk drive | customer: | |
(HDD) may not function correctly on this | If in the primary bay the customer is using a | |
system. Ensure that your HDD is supported | ||
on this system and that the latest HDD | (HDD), or an old generation IBM HDD | |
firmware is installed. | which is not supported by this system, with | |
| the risk in mind, the customer can still use it | |
| by pressing ESC. If in the primary drive bay | |
| the customer is using a supported | |
| IBM/Lenovo HDD with an old firmware, | |
| the customer needs to update its firmware to | |
| the latest. The latest version is available at | |
| http://www.lenovo.com/support | |
|
|
|
2100 | 1. | Reseat the hard disk drive. |
Initialization error on HDD0 (Main hard | 2. | Main hard disk drive. |
disk drive) | 3. | System board. |
|
|
|
2102 | 1. | Reseat the hard disk drive. |
Initialization error on HDD1 (Ultrabay hard | 2. | Ultrabay hard disk drive. |
disk drive) | 3. | System board. |
|
|
|
2110 | 1. | Reseat the hard disk drive. |
Read error on HDD0 (Main hard disk drive) | 2. | Main hard disk drive. |
| 3. | System board. |
|
|
|
2112 | 1. | Reseat the hard disk drive. |
Read error on HDD1 (Ultrabay hard disk | 2. | Ultrabay hard disk drive. |
drive) | 3. | System board. |
|
|
|
Error messages
Symptom or error | FRU or action, in sequence | |
|
|
|
Device address conflict. | 1. | Load “Setup Defaults” in the BIOS |
|
| Setup Utility. |
| 2. | Backup battery. |
| 3. | System board. |
|
|
|
Allocation error for device. | 1. | Load “Setup Defaults” in the BIOS |
|
| Setup Utility. |
| 2. | Backup battery. |
| 3. | System board. |
|
|
|
Failing bits: nnnn. | 1. | DIMM. |
| 2. | System board. |
|
|
|
Invalid system configuration data. | 1. | DIMM. |
| 2. | System board. |
|
|
|
I/O device IRQ conflict. | 1. | Load “Setup Defaults” in the BIOS |
|
| Setup Utility. |
| 2. | Backup battery. |
| 3. | System board. |
|
|
|
Hibernation error. | 1. | Restore the system configuration to |
|
| what it was before the computer |
|
| entered hibernation mode. |
| 2. | If memory size has been changed, |
|
| |
|
|
|
