![](/images/new-backgrounds/1116711/11671175x1.webp)
Checkout guide
Creating the PC-Doctor diagnostics diskette
In X60, the
To create the
1.Enter the ThinkVantage Rescue and Recovery application by pressing the blue ThinkVantage button during POST.
2.When the ThinkVantage Rescue and Recovery application finishes loading,
3.It will take about 15 seconds to authenticate the digital signature, and then the ThinkPad computer will reboot into
4.A batch file will automatically start up to prompt the user through creating the boot diskettes. The user will be informed how many diskettes will be needed.
a.The user will be prompted to insert each diskette in sequence.
b.Typically, the user only needs to press the Enter key for the proper floppy drive to format and create the diskette.
c.Each diskette will be erased and formatted with the
5.Once all the diskettes have been created, the ThinkPad computer will reboot. The user is asked to remove all diskettes from the drive, or to insert the first diskette created if it is desired to run the diagnostics.
To run the test, do as follows:
Note: In the following procedure, you can select an item not only with the arrow keys, but also with the TrackPoint. Instead of pressing Enter, click the left button.
1.Insert the
If the computer cannot be powered on, go to “Power system checkout” on page 34, and check the power sources.
If an error code appears, go to
On the first screen, select the model and press Enter. Follow the instructions on the screen.
2.The main panel of
3.Select Diagnostics with the arrow keys, and press Enter.
A
Note:
The options on the test menu are as follows: