Related service information
How to remove the hard-disk password
Attention: If User only mode is selected and the user HDP has been forgotten and cannot be made available to the servicer, neither Lenovo nor Lenovo authorized servicers provide any services to reset the user HDPs or to recover data from the hard disk drive. The hard disk drive can be replaced for a scheduled fee.
To remove a user HDP that has been forgotten, when the SVP and the master HDP are known, do the following:
1.Turn on the computer; then, while the “To interrupt normal startup, press the blue ThinkVantage button” message is displayed at the
For models supporting the Passphrase function, press F1 while HDP icon is appearing on the screen; then enter the master HDP. For the other models, enter the master HDP.
Note: To check whether the ThinkPad computer supports the Passphrase function, enter the BIOS Setup Utility and go to Security
2.Click Access BIOS. The system Restart Required window is displayed.
3.Click Yes. The computer restarts, and the BIOS Setup Utility screen opens.
4.Select Security, using the cursor directional keys to move down the menu.
5.Select Password.
6.Select
7.Select Master HDP.
8.Type the current master HDP in the Enter Current Password field. then leave the Enter New Password field blank, and press Enter twice.
9.Press F10.
10.Select Yes in the Setup Configuration window.
Both user HDP and master HDP will have been removed.
Power management
To reduce power consumption, the computer has three power management modes: screen blank, standby, and hibernation.
Screen blank mode
Screen blank mode has three variants, as follows:
1.If you press Fn+F3, or if the time set on the “LCD off timer” in the BIOS Setup Utility expires,
vThe LCD backlight turns off.
vThe hard disk drive motor stops.
vThe speaker is muted.
2.If you are using the Advanced Configuration and Power Interface (ACPI) operating system and you press Fn+F3,
vThe LCD backlight turns off.
vThe hard disk drive motor stops.
3.If the time set on the “Turn off monitor” timer in the operating system expires,
vThe LCD backlight turns off.
To end screen blank mode and resume normal operation, press any key.
