34 EN

TIMER RECORDING (cont.)

Automatic Satellite

Programme

Recording

This function allows you to automatically record a satellite programme which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the recorder’s AV2 (L-2) IN/DECODER connector and programme the timer on the satellite receiver. The recorder starts or stops recording by the signals input from the satellite receiver. After recording, the recorder’s power shuts off automatically.

ATTENTION

●Be sure not to turn on the satellite receiver before the programme is executed; otherwise, the recorder will start recording when the satellite receiver’s power is turned on.

●If you have connected another appliance other than a satellite receiver to the AV2 (L-2) IN/DECODER connector, be sure not to engage the Automatic Satellite Programme Recording mode; otherwise, the recorder will start recording when the connected appliance’s power is turned on.

●Automatic Satellite Programme Recording and timer- recording cannot be done at the same time.

Before performing the following steps:

●Make sure the satellite receiver is connected to the recorder’s AV2 (L-2) IN/DECODER connector. ( pg. 40, 41)

●Programme the timer on the satellite receiver.

●Insert a cassette with the safety tab in place.

A Select the L-2 SELECT mode.

Set “L-2 SELECT” to “A/V” or “SAT” ( pg. 37).

● When you select “SAT”, refer to “IMPORTANT” on page 40.

B Set the tape speed.

Press SP/LP (p).

C Engage the Automatic Satellite Programme

Recording mode.

Press and hold SAT# for about 2 seconds. The button lights up and the recorder turns off automatically.

NOTES:

●To disengage the Automatic Satellite Programme Recording mode, press SAT#. The button’s light goes off.

●If the recorder’s power is off, it is not possible to engage the Automatic Satellite Programme Recording mode.

●In step 3, if the SAT# button does not light but instead blinks quickly even though your satellite receiver’s power is off, Automatic

Satellite Programme Recording will not work properly with that satellite receiver*. If this is the case, perform “Express Timer Programming” ( pg. 30) to timer-record a satellite programme.

*Some satellite receivers output signals even if the power is off. Automatic Satellite Programme Recording is not possible with those satellite receivers.

●The SAT# button blinks while Automatic Satellite Programme Recording is in progress.

●For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.

●Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer.

●Pressing the recorder’s 1 button while Automatic Satellite Programme Recording is in progress turns off the recorder’s power and disengages the Automatic Satellite Programme Recording mode.

●If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording, it is not possible to set different tape speeds for each programme.

●Depending on the type of satellite receiver, the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.

●If you engage the Automatic Satellite Programme Recording mode when the satellite receiver’s power is on, the recorder will not start Automatic Satellite Programme Recording even though the SAT# button blinks. When the satellite receiver shuts off once and is turned back on again, the recorder starts recording.

●You can also record a programme from your cable system in the same way if the system has a timer.

●The B.E.S.T. system ( pg. 27) does not work while Automatic Satellite Programme Recording is in progress.

●Just Clock ( pg. 56) does not work when the Automatic Satellite Programme Recording mode is engaged.

●When the Automatic Satellite Programme Recording mode is engaged, or the recorder’s power is turned off after Automatic Satellite Programme Recording is finished, the recorder will not enter the Timer mode even though “AUTO TIMER” is set to “ON”.

●After Automatic Satellite Programme Recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function ( pg. 20).

Page 33 Page 35
Page 34
Image 34
JVC HR-S6700EU specifications Programme Recording, 34 EN, Select the L-2 Select mode, Recording mode
Page 33 Page 35

HR-S6700EU specifications

The JVC HR-S6700EU is a standout model in the realm of VHS players and recorders, celebrated for its impressive array of features and performance capabilities. Released during the height of VHS technology in the early 1990s, this device combines innovative engineering with user-friendly operation, making it a cherished model among enthusiasts and casual users alike.

One of the hallmark features of the HR-S6700EU is its S-VHS recording capability, which enhances the quality of the video output, providing sharper and clearer images compared to standard VHS. This dual-format recording means that users can still play regular VHS tapes while enjoying the superior quality of S-VHS recordings. This flexibility makes the HR-S6700EU an excellent choice for anyone looking to transfer old tapes to a higher-quality format or simply enjoy their favorite films in better clarity.

The device boasts advanced picture processing technologies, including JVC’s unique digital image stabilization, which minimizes tracking and playback issues that can occur with older tapes. This feature ensures that users maintain a clear viewing experience without the annoying artifacts that can detract from older recordings. Additionally, the HR-S6700EU incorporates automatic tracking technology that adjusts the playback head alignment, ensuring optimal performance even with worn or damaged tapes.

Another notable characteristic of the HR-S6700EU is its VCR+ system, which simplifies the programming of recordings. This automated feature allows users to input a code corresponding to the desired program and have the VCR schedule the recording without any tedious manual settings. The ease of use extends to its intuitive front panel layout, making navigation and operation straightforward for users of all ages.

In terms of connectivity, the JVC HR-S6700EU is equipped with various inputs and outputs, including composite video, audio outputs for connecting to home theater systems, and even a digital output, which allows for easier transfers to modern devices. The built-in tuner provides access to terrestrial broadcasts, enhancing the overall functionality of the VCR.

With its robust build quality and reliability, the JVC HR-S6700EU stands the test of time. Users appreciate its compact design and the fact that it integrates seamlessly into existing entertainment systems. All in all, the JVC HR-S6700EU encapsulates the pinnacle of VHS technology, marrying performance with versatility, making it a valuable addition to any retro video collection.
Top Page Image Contents