Filename [HRS7700EU1.fm]
Masterpage:Left
16 EN
Page 16 March 8, 2000 1:13 pm
SAT CONTROL SET (cont.)
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver’s brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
ATurn on the satellite receiver.
Turn on the satellite receiver’s power.
BAccess the Main Menu screen on the
recorder.
Press MENU.
CAccess the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL
SET”, then press OK or e.
DAccess the Sat Control Set screen.
EEnter the satellite receiver’s brand.
FSelect the satellite receiver’s channel for
testing.
Turn on the TV and select the video channel (or AV
mode).
Press rt to move the
highlight bar (pointer) to
“SAT CONTROL SET”, then
press OK or e.
Press the appropriate
NUMBER keys to enter the
brand code from the list on
page 17, then press OK.
●If the brand code you entered
is invalid, the code field will
be reset. Enter the correct
brand code again.
●If the recorder is in playback or
recording mode, you cannot
set the brand code.
Press the appropriate
NUMBER keys to enter one
of the channel positions on
the satellite receiver, then
press OK.
●You can select the channel
position between 1 to 999.
●After pressing OK, the recorder
enters the Test mode.
HRS7700EU1.fm Page 16 Wednesday, March 8, 2000 1:14 PM