CMake connections

Connect the recorder’s L-2 IN/DECODER connector to the satellite receiver’s 21-pin SCART connector.

DConnect Satellite Controller to recorder

Connect the Satellite Controller to the SAT CONTROL connector on the rear panel.

 

Satellite receiver

Transmitter

To VCR

 

 

connector

Satellite Controller

21-pin SCART cable

(not provided)

(not provided)

 

To L-2 IN/

 

DECODER

 

Your recorder

To SAT CONTROL

ETurn on satellite receiver

Turn on the satellite receiver’s power.

FAccess Main Menu screen, then Initial Set screen

Press MENU. Press rt to place the pointer next to “INITIAL SET”, then press OK or e.

GAccess Sat Control Set screen

Press rtto place the pointer next to “SAT CONTROL SET”, then press OK or e.

H Enter satellite receiver’s brand

Press the appropriate number keys to enter the brand code from the following list, then press OK.

●If the code you entered is invalid, the code field will be reset. Enter the correct

code again.

BRAND NAME

CODE

BRAND NAME

CODE

 

 

 

 

JVC

73

MASPRO

70

AMSTRAD

60, 61, 62, 63, 92

NOKIA

87, 94

ASTON

97

PACE

65, 67, 74, 86,

CANAL

81

 

92, 97

SATELLITE

 

PANASONIC

74, 92

CANAL +

81

PHILIPS

66, 84, 101

D-BOX

85

RADIX

78

ECHOSTAR

82

RFT

69

(VIA DIGITAL)

 

SABA

97

FINLUX

68

SAGEM

83, 90

FORCE

89

SALORA

68

GALAXIS

88

SAMSUNG

83

GRUNDIG

64, 65, 102

SIEMENS

64

HIRSCHMANN

64, 78, 99

SKYMASTER

69, 98

HUMAX

88

TECHNISAT

66, 100

ITT NOKIA

68

THOMSON

97

JERROLD

75

TPS

83

KATHREIN

70, 71, 96

TRIAX

91

LUXOR

68

WISI

64

MASCOM

93

 

 

 

 

 

 

ISelect satellite receiver’s channel for testing

Press the appropriate number keys to enter the channel position on the satellite receiver, then press OK. The recorder enters the test mode.

J Check result of the test

If the satellite receiver’s channel number has been changed to the same one as you set in step 9 …

Press rt to place the pointer next to

“CHANGED TO …”, then press OK or e to finish the Sat Control Set mode.

If the satellite receiver’s channel number has not been changed correctly …

Press rt to place the pointer next to “NOT CHANGED”, then press OK or e. Then perform the procedure again from step 8.

NOTE:

The Satellite Controller may not function properly with some types of satellite receiver.

Playback

Basic Playback

Turn on the TV and select the video channel or AV mode.

ALoad a cassette

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the recorder.

●Do not apply too much pressure when inserting.

●The recorder turns on, and the counter is reset, automatically.

●If the cassette’s record safety tab has been removed, playback begins automatically.

BStart playback

Press 4.

During playback

Stop playback

Press 8 on the remote OR Press 0 on the recorder. control.

Pause playback and view still picture

Press 9.

●Press 4 to resume normal playback.

●If there is vertical jitter, press PR r/t on the remote control or PR+/– on the recorder to correct the picture.

Pause and Frame-by-Frame playback

Press 9 to pause, then press w or e (or 9) repeatedly.

●Press 4 to resume normal playback.

Picture Search

Press 3 or 5. Press 3 or 5 again to perform high- speed search.

●Each time you press 3 or 5, the search speed changes between low-speed and high-speed.

●Press 4 to resume normal playback.

Variable Speed Search (including slow-motion)

Press w or e repeatedly.

●Press 4 to resume normal playback.

●Each time you press w or e, the playback speed changes. To decrease the speed during picture search, press the opposite direction button repeatedly.

●During still picture, press and hold e to start forward (or w to start reverse) slow motion playback. When you release the button, still picture resumes. During still picture, holding 9 for more than 2 seconds also starts forward slow motion playback. If you press 9 again, still picture resumes.

●During slow motion playback, some noise may appear on the TV screen. Press PR r/t on the remote control or PR+/– on the recorder to eliminate the noise.

— 6 —