Reverse |
|
|
|
| Forward | |
Reverse |
| Reverse | Slow |
| Forward | |
Reverse | slow | Normal | ||||
search | motion | search | ||||
play | motion | play | ||||
3 steps | 1 step | 4 steps | ||||
| 1 step |
| ||||
|
|
|
|
|
●For Automatic Power Off
Press 3, then press 1 within 2 seconds.
●For Automatic Timer Standby
Press 3, then press # within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.
Playing back tape repeatedly (100 times)
—Repeat Playback
During playback, press and hold 4for more than 5 seconds. “$” on the display panel starts blinking slowly. To stop playback, press 8 on the remote control or 0 on the recorder.
When the tape is not running
Press 3 or 5.
Eject the cassette
Press 0.
●You can also eject the cassette when the recorder is turned off.
Turn off the recorder
Press 1.
NOTE:
Pressing 4, 3, 5 or 9 also stops Repeat Playback.
Locating beginning of recordings
—Index Search
Index codes are placed on the tape at the beginning of each recording when recording on this recorder.
AWhile the tape is not running, press wor
e (2 or 6 ) to start search.
ATTENTION:
In the search, still,
B To access a recording of 2 to 9 index codes away, press w or e (2 or 6 )
repeatedly until the correct number is displayed on the screen (only if “O.S.D.” is set to “ON” ( 12)).
●the picture will be distorted
●the noise bars will appear
●there will be a loss of color with an
Playback Features
Adjusting tracking condition
Automatic tracking adjustment
Example:
To locate the beginning of B from the current position, press w twice.
To locate the beginning of D from the current position, press e once.
●Playback begins automatically when the desired recording is located.
Current position
Index number
When a new cassette is loaded, the recorder enters the automatic tracking mode.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during playback, adjust the tracking manually.
On the remote control:
APress p to activate manual tracking.
BPress PR r or t to eliminate the noises. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment.
● Press p again to reactivate automatic tracking.
Selecting Soundtrack
Your recorder is capable of recording three soundtracks (HIFI L j, HIFI h R and NORM) and plays back the one you select. Pressing AUDIO changes the soundtrack as follows:
HIFI L j h R : For
HIFI L j | : For main audio of Bilingual tapes |
HIFI h R | : For sub audio of Bilingual tapes |
NORM | : For |
HI FI NORM | : For |
NOTE:
Set “O.S.D.” to “ON” to display the indications on the screen. ( 12)
Automatic operations after rewinding
—Next Function Memory
Locating beginning of timer recordings
—Instant Review
After ensuring that the recorder is turned off and that the timer mode is disengaged, press REVIEW.
●The recorder turns on, and rewinds to the index code indicating the beginning of the last
● You can access a programme as far as 9 index codes away from the current tape position. For example, if you have
REVIEW indicator and “3” blink. To watch the first of the 3 programmes, press REVIEW three times.
●The number of recorded programmes is not displayed on the display panel after Automatic Satellite Programme Recording.
●The Instant Review function can also operate if the recorder is turned on.
Skipping unwanted portions
—Skip Search
Press 30 SEC
once to 4 times during playback. Each press initiates a
2 minutes). When the specified portion of the tape is skipped, normal playback resumes automatically. To return to normal playback during Skip Search, press 4.
The Next Function Memory “tells” the recorder what to do after rewinding. Ensure that the recorder is in stop mode.
●For Automatic Playback Start
Press 3, then press 4 within 2 seconds.
— 7 —