34 EN, For Example | JVC HR-VP683U guide

34 EN		OTHER USEFUL FUNCTIONS (cont.)
		* The default setting is bold in the table below.

⬛ AUTO SP = EP TIMER	When this function is set to “ON”, the VCR automatically switches to EP
ON	mode to allow complete recording if there is not enough tape to record
OFF	the entire program while timer-recording in SP mode.
	For Example . . .
	Recording a program of 210 minutes in length onto a 180-minute tape
		Approximately 110 minutes	Approximately 30 minutes

		SP mode	EP mode
	Make sure you set this function to “ON” before the timer-recording starts.
	NOTES:
	● If you have programed the VCR to timer-record 2 or more programs, the second
	program and those thereafter may not fit on the tape with this function set to
	"ON". In this case, do not use this function, but change the tape speed manually
	during timer programing.
	● In order to ensure that the recording fits on the tape, this function may leave a
	slight non-recorded portion at the end of the tape.
	● There may be some noise and sound disturbance where the tape speed switches
	from SP to EP mode on the tape.
	● This function is not available during ITR (Instant Timer Recording), and will not
	work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-
	120.

⬛ VIDEO STABILIZER	When this function is set to “ON”, you can automatically correct vertical
ON	vibrations in the picture when playing back unstable recordings made on
OFF	another VCR.
	NOTES:
	● When you finish viewing a tape, be sure to set this function to “OFF”.
	● Regardless of the setting, this function has no effect during recording and during
	special effects playback.
	● The on-screen display may jitter vertically when this function is set to “ON”.
	● To watch recordings with close-caption, set this function to “OFF”.

⬛ BLUE BACK	When this function is set to “ON”, the TV screen becomes all blue in the
ON	following cases:
OFF	● When receiving a channel not in use.
	● When stopping playback.
	NOTE:
	When you want to receive an unstable channel with poor signals, set this function
	to “OFF”.

Image 34

JVC HR-VP683U manual 34 EN, For Example

Contents

HR-VP683U Dear Customer Telephone Number Power Cord Protection Power SourcesPower Lines Grounding or Polarization Cleaning AccessoriesDamage Requiring Service Replacement Parts Contents Antenna or cable Audio OUT not supplied AC Power CordBasic Connections Coaxial cable Flat feeder Matching transformer Connect VCR to TV Check contentsSituate VCR Final preparation for use Perform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Access Initial Set screen Language SettingAccess Main Menu screen Select language Preparations Clock Setting10 EN Select clock set Select host channel Setting clock semiautomaticallySet Auto Clock to on Select time zone 12 EN Setting clock manuallySelect D.S.T. mode Manual Clock Set Perform Auto Channel Set Tuner SettingAccess Tuner Set screen Automatically Auto Channel Set 14 EN Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channels Basic Playback Load a cassette Changing display information Basic Playback Features16 EN Checking tape position Selecting monitor sound Adjusting tracking conditionAutomatic operations after 18 EN Locating beginning of timerAccess distant code Locating beginning Select recording channel BasicRecording Set tape speed Specifying recording length Basic Recording Features20 EN Watching one program while recording another Erase on-screen display Showing on-screen displayDisplay VCR status on TV screen Accidental erasure prevention Locating particular scene Special Effect Playback22 EN Rapidly Picture Search High-Speed Picture Search Viewing slow motion picture Viewing still pictureSkipping unwanted portions Pause during playback Access VCR Plus+ screen VCR Plus+ Timer Programing24 EN Input receiving channel number Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Press SP/EP 26 EN VCR Plus+ SetupVCR Plus+ guide channel matching Access Guide Channel Set screen Input guide channel number Express Timer Programing 28 EN To timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speed Checking program settings 30 EN Select program to modify Confirm overlapping programsOverlapping programs blink on the screen 32 EN Useful Function SettingsChange setting Select Function When this function is set to on When this function is set to OFF 34 EN For Example Normal and Hi-Fi tracks. The main audio is not recorded Hi-Fi and normal tracks Preventing 36 EN Edit To Or From Another Connection Turn on the TV TV Brand Setting38 EN Set TV brand code Operate cable box Cable Box Brand SettingTurn on the cable box Ex. To set the Remote to RCA Turn on the DBS receiver DBS Receiver Brand Setting40 EN Operate DBS receiver Unplug VCR Changing Remote Control CodeSet remote control code for Remote Plug in VCR Troubleshooting 42 EN Timer Recording Can the VCR indefinitely remain in still mode? 44 ENWhat happens if the tape reaches its end during recording? VCR PLUS+ setup Manual setting Preparation Semiauto settingExpress timer recording List of terms Front panel 46 ENFront display panel Rear panel On-screen display 48 EN How to use the RemoteRemote Specifications HOW to Locate Your JVC Service Center 50 EN Limited Warranty HR-VP683U