![](/images/new-backgrounds/1224803/22480337x1.webp)
Basic |
| EN 19 | |
This VCR can check the tape condition during recording | |||
| |||
Recording | (and playback), and realizes the best possible pictures. | ||
cover the hole with adhesive tape before | |||
| Load a cassette | ||
| 1 Make sure the record safety tab is intact. If not, | ||
Turn on the VCR and the TV, and select the VCR | inserting the cassette. | ||
Select recording channel | |||
channel 3 or 4 (or AV mode) on the TV. | |||
FF ( Á ) | 2 On the front panel: | ||
PLAY ( 3 ) | Press CH5°. | ||
POWER | On the Remote: | ||
REW ( 1 ) | |||
| a– | Press CH + or | |
|
| or | |
| b– | Press the Number keys then ENTER. | |
|
| (The channel changes after a few seconds | |
|
| whether you press ENTER or not.) | |
SP EP | ● If you connect the TV and the VCR only using | ||
VCR |
|
| |
| the RF connection, press TV/VCR on the Remote | ||
2 3 | so that the VCR mode indicator lights on the front | ||
display panel, to view the program to be recorded. | |||
|
4 |
|
|
|
|
|
|
| Set tape speed | |||||
|
|
|
|
| ||
| STOP/EJECT |
|
| 3 Press SP/EP to set the recording speed. | ||
|
| |||||
| ( 7 / 0 ) PAUSE ( 8 ) | |||||
|
|
|
|
|
| Start recording |
|
|
|
|
| 4 On the front panel: | |
|
|
|
|
|
| Press REC ( ¦ ). |
|
|
|
|
|
| On the Remote: |
| POWER |
| While holding REC ( ¦ ), press PLAY ( 3 ). |
1
4
7
1
REW ( 1 )![](/images/new-backgrounds/1224803/22480337xi2.webp)
![](/images/new-backgrounds/1224803/22480337xi3.webp)
4
2 | 3 |
|
|
| 2 |
5 | 6 | |
8 | 9 |
|
0 |
| 4 |
|
| |
|
| 3 |
|
| FF ( Á ) |
|
| PAUSE ( 8 ) |
|
| |
|
| STOP ( 7 ) |
●If “VIDEO CALIBRATION” is set to “ON” (default setting: ☞ pg. 33), this VCR checks the tape con- dition for about seven seconds, then starts record- ing. (This means that the first seven seconds of the program will not be recorded. If this is incon- venient for you, follow the steps below:
1Press REC ( ¦ ) and PAUSE ( 8 ) to start Video Calibration.
2Then press PLAY ( 3 ) to start recording after Video Calibration is complete.
To pause recording
Press PAUSE ( 8). To resume recording, press PLAY ( 3 ).
To stop recording
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.
To rewind the tape
Press REW ( 1 ).
To
Press FF ( Á ).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.
●You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.