Specifications
Audio
Continuous Amplifier Power (five channels driven)
75 watts/ch
Continuous Amplifier Power (two channels driven)
100 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
Total Harmonic Distortion <0.09%
Intermodulation Distortion (60 Hz:7 kHz) <0.05%
Frequency Response
10 Hz - 20 kHz, ±1 dB (analog input)
10 Hz - 20 kHz, ±0.3 dB (digital input)
Signal to Noise Ratio (IHF
90 dB (Dolby Digital, dts) 0dBFs
Input Sensitivity/Impedance
Line Level: 200 mV/47 kohms
Tone Controls (Bass/Treble)
±8 dB at 100 Hz/10 kHz
Preamp Output Level
1.2 V (200 mV Input)
Video
Frequency Response
3 Hz – 10 MHz, ± 3 dB
Signal to Noise Ratio
45 dB
Input Impedance
75 ohms
Output Impedance
75 ohms
Output Level 1 volt
FM Tuner
Usable Sensitivity 14.2 dBf
Signal to Noise Ratio (at 65 dBf) 70 dBf
Harmonic Distortion (at 65 dBf) 0.03%
Stereo Separation (1 kHz) 45 dB
Output level 1 V
35 | English |
Antenna Input
75 ohms unbalanced
AM Tuner
Sensitivity
500 μV/m
Signal to Noise Ratio 40 dBf
Output level 500 mV
Antenna Input
Loop Antenna
General
Power Consumption:
450 watts
Power Requirements (AC) 115 volts, 60Hz (USA version) 230 volts, 50Hz (CE version)
Weight
17 Kg/37.4 lb.
Dimensions (W x H x D) 432 x 162 x 442 mm 17.01" x 6.38" x 17.40"
Front Panel Height
(feet removed/for rack mount) 150 mm / 5.91"
When sizing openings in custom cabinets, measure the exact unit to be installed and/or allow at least 1 mm extra clearance on all sides for unit to unit production tolerances.
All specifications are accurate at the time of printing. Rotel reserves the right to make improve- ments without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.