Additional Operation - VCR part
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD+VCR’s external inputs.
1.Make sure that the component you want to record from is connected properly to the DVD+VCR.
2.Press AUX repeatedly to select the external input to record from.
AV 1 for recording from EURO AV1 SCART jacks on the rear of your unit.
AV 2 for recording from EURO AV2 SCART jacks on the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN (Left & Right) jacks on the front of your unit.
3.Load a recordable tape.
4.Set a recording mode (SP or LP) as necessary by
pressing 
repeatedly.
5.Play the tape or disc in the external component. If you have a TV attached to your DVD+VCR, you can see the video playing.
6.Press ¥once to start recording.
The REC indicator lights in the display window.
7.Press ∫to stop recording.
Notes:
•Before recording, confirm the recording start position.
•If your source is
•To record for a fixed length of time, see
You can copy the contents of a DVD to a VHS tape.
1.Insert the disc you wish to copy into the DVD deck and close the disc tray.
2.Insert a blank VHS video tape into the VCR deck.
3.Find the place on the DVD from which you want to start dubbing using the 1, 6, 5and ; functions.
For best results, pause playback at the point from which you want to record.
4.Press ¥on the Remote Control. The DVD goes into PLAY mode and the VCR goes into RECORD mode. If the DVD disc menu appears, you may need to press 1manually to begin copying.
5.When the DVD is finished playing, press ∫to end copying.
Notes:
•If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs (or Discs). “LOCK” is displayed in the display window.
•You must stop the copy process manually when the DVD movie ends, or the unit may replay and record over and over again.
•When you stop the DVD playback during copying, the recording on VCR is stopped automatically.
OPERATION
27