Operation with tape
Timer recording using On Screen Display (Continued)8.Press i to set another timer record event and follow steps 3 to 8.
Check that the timer event details are correct. Press i return to screen.
If PLEASE CHECK is displayed, you have entered incorrectly and will need to
9.Press Í/I to switch your DVD+VCR to Timer Standby mode.
The timer symbol (
) will appear in the display window while your DVD+VCR waits to make the recording.
10.Press Í/I to end timer recording.
Notes:
•The DVD+VCR will automatically power off when Timer Recording ends.
•During timer recording standby mode, the DVD and VCR mode cannot be operated. To use the DVD+VCR, press Í/I. After you use the DVD or VCR, press Í/I again to put the VCR into timer recording standby mode.
•If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Use 3 or 4to select the event that you wish to delete or change.
Press 2to delete the event...or
Press ENTER/OK to change; then press 2or 1to select; Station, Date, Start and End times and recording speed. Press 3or 4to enter the correct information.
•If Timer record events Overlap...
Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.)
•To watch a DVD while performing a timer recording, press TV/VCR to select VCR mode.
24