2.Keep the Cultivator and surrounding area clean of flammable objects at all times.
3.When spills of fuel or oil occur, they must be cleaned up immediately. Dis- pose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a covered metal container.
4.Never store fuel or other flammable materials near the Cultivator.
5.Do not smoke, or allow sparks, flames or other sources of ignition around the Engine and Fuel Tank. Fuel vapors are explosive.
6.Keep grounded conductive objects, such as tools, away from exposed, live electrical parts and connections to avoid sparking or arcing. These events could ignite fumes or vapors.
7.Always fill the Engine’s Gas Tank to approximately
8.Do not refill the Fuel Tank while the Engine is running or while the Engine is still hot. Do not operate the Cultivator with known leaks in the fuel system.
9.Excessive buildup of unburned fuel gases in the exhaust system can create a potentially explosive condition. This buildup can occur after repeated failed start attempts, valve testing, or hot engine shutdown. If this occurs, open exhaust system drain plugs, if equipped, and allow the gases to dissipate before attempting to restart the Engine.
10.Always check the Engine oil level prior to starting the Engine. Make sure to read and understand the Engine Owner’s Manual for the proper oil level and oil change schedules.
11.Use only engine manufacturer recommended fuel and oil. Refer to the En- gine Owner’s Manual for further instructions.
MECHANICAL PRECAUTIONS
1.ALWAYS make sure the Engine’s Throttle Control (71) is in its “OFF” posi- tion. Disconnect the spark plug wire, and allow the Engine to completely cool before carrying out maintenance.
2.Check for damaged parts. Before using the Cultivator, any part that appears damaged should be carefully checked to determine that it will operate
SKU 91959 | For technical questions please call | PAGE 6 |
