Harbor Freight Tools 91959 manual Inspection, Maintenance, And Cleaning, To Stop The Cultivator

Models: 91959

1 14
Download 14 pages 13.72 Kb
Page 11
Image 11
To Stop The Cultivator:

12.Always keep a safe distance away from the edges and banks of ditches and avoid any actions that might cause the Cultivator to topple over.

CLUTCH HANDLE (73)

UPPER HANDLE (66)

THROTTLE CONTROL (71)

FIGURE D

 

OUTER/INNER TINES

 

(37, 50, 40)

To Stop The Cultivator:

1.Release your grip on the Clutch Handle (73), and allow it to return to its “NEU- TRAL” position. (See Figure D.)

2.Turn the Throttle Control (71) to its “STOP” position.

3.Close the Fuel Valve on the Engine.

4.NOTE: Always park the Cultivator on a firm and level surface away from all flammable materials such as leaves, brush, weeds, etc.

INSPECTION, MAINTENANCE, AND CLEANING

1.INSPECTION, MAINTENANCE, AND CLEANINGManual background CAUTION! Always make sure the Engine’s Throttle Control (71) is in its “STOP” position. Disconnect the spark plug wire from the Spark Plug. And allow sufficient time for the Engine to completely cool before performing any inspection, maintenance, or cleaning on the Cultivator and/or Engine.

2.Before each use, inspect the general condition of the Cultivator. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. If a problem occurs, always have the Cultivator immediately checked out by a qualified service technician before further use. Do not use damaged equipment.

SKU 91959

For technical questions please call 1-800-444-3353

PAGE 11

Page 11
Image 11
Harbor Freight Tools 91959 manual Inspection, Maintenance, And Cleaning, To Stop The Cultivator