Harbor Freight Tools 91959 manual CALIFORNIA PROPOSITION 65 WARNINGS, Owner/Operator Precautions

CALIFORNIA PROPOSITION 65 WARNINGS

1.WARNING! Operation of this Cultivator and/or Engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

(California Health & Safety Code 25249.5, et seq.)

OWNER/OPERATOR PRECAUTIONS

1.WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

ASSEMBLY INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the Assembly Diagram on page 14.

1.Prior to use, the Lower Handle (65) must be attached to the Housing (13). To

do so, align the mounting holes at the bottom (on each side) of the Lower Handle with the mounting holes located on each side of the Housing. Then use four Bolts (64), four Washers (26), and four Self-Lock Nuts (27) to secure the Lower Handle to the Housing. (See Figure A.)

	UPPER HANDLE
		UPPER HANDLE
(66)
		(66)
	LOWER HANDLE	LOWER HANDLE
(65)		(65)
GRIP			GRIP
HANDLE			HANDLE
(67)		(67)

	BOLT (64)		BOLT (64)
	WASHER (26)		WASHER (26)
	SELF-LOCK NUT (27)	FIGURE A	SELF-LOCK NUT (27)
SKU 91959	For technical questions please call 1-800-444-3353			PAGE 8