JVC HR-XV48EK Dubbing (from DVD to VHS), NOTES:, E End dubbing, D Start dubbing, EDITING (VHS DECK) (cont.), A Load a cassette and place a disc, DVD, Press, Slide the

46 EDITING (VHS DECK) (cont.)

Dubbing (from DVD to VHS)

You can dub selected scenes from the DVD disc to a cassette, starting and stopping wherever you wish.

However, it is not possible to dub copy-protected discs. In such case, “ERROR” appears on the front display panel.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch on the remote control to the right.

Slide to the right.

A Load a cassette and place a disc.For the VHS deck

Insert a cassette with the record safety tab intact.

For the DVD deck

APress x on the DVD deck to open the disc tray. B Place the disc in the disc tray.

C Press x on the DVD deck to close the disc tray.B Prepare the VHS deck for dubbing.APress VCR.BPress p to select recording speed.

CSearch for the point where you want to start dubbing by pressing 4, 5 or 3 then press 8.

C Prepare the DVD deck for dubbing.APress DVD.

BStart playback and search for the point where you want to start dubbing by pressing 4, 5 or 3.

D Start dubbing.

A little before the dubbing start point, press and hold 7, then press 4 on the remote control.

●“dub” lights on the front display panel.E End dubbing.

Press 8.

●Be sure to press 8 while the VCR indicator lights up on the unit.

●If you press 8 or x with the DVD deck selected, the dubbing stopped, but the opening screen is also recorded.

●When you have finished dubbing, press DVD to select the DVD deck and press 8 to stop playback.

NOTES:

●Set “ON SCREEN GUIDE” to “OFF” ( pg. 57) if you do not want to record the on-screen display for DVD discs during dubbing.

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.●Set “PICTURE CONTROL” to “EDIT.” ( pg. 53)