74
SUBSIDIARY INFORMATION (cont.)
CORRECTIVE ACTION
Position the camcorder so its
microphone is away from the TV.
Turn the TV’s volume down.
If you need the skipped channels,
restore them (Z pg. 64).
Press PAUSE to pause the recording,
change channels, then press PLAY to
resume recording.
Perform manual setting again.
Connect the TV aerial cable to the
recorder properly and turn off the
recorder power once, then turn the
recorder power back on again. The
recorder will try Auto Set Up again
(Z pg. 8).
Re-set the remote control to the
correct brand (Z pg. 50, 51).
SYMPTOM
1. Whistling or howling is heard from
the TV during camcorder record-
ing.
2. When scanning channels, some of
them are skipped over.
3. The channel cannot be changed.
4. Channel settings that were made
manually seem to have changed or
disappeared.
5. No channels are stored in the
recorder's memory.
6. The remote control won’t operate
the TV or satellite tuner.
POSSIBLE CAUSE
●The camcorder’s microphone is too
close to the TV.
●The TV’s volume is too high.
●Those channels have been desig-
nated to be skipped.
●Recording is in progress.
●After the manual settings were
made, Auto Channel Set was
performed.
●The TV aerial cable was not
connected to the recorder when
Auto Set Up was performed.
●The remote control brand setting is
incorrect.
OTHER PROBLEMS
CORRECTIVE ACTION
Refer to "Guide Program Number Set"
and re-perform the procedure
(Z pg. 70).
SYMPTOM
7. VIDEO Plus+ does not timer-record
properly.
POSSIBLE CAUSE
●The recorder’s channel positions
have been set incorrectly.
TIMER RECORDING