79
eSTANDBY/ON Button — same as button on
recorder.
r Button accesses Program screens/displays
to check the programme that you have pro-
grammed (next programme's information
screen/display appears each time button is
pressed). Z pg. 22
t– –:– – (DISPLAY) Button switches display
between clock time, tape remaining time,
counter readings and preset position*. Z pg. 17
* Preset position is not displayed during playback.
ENTER Button is used for TV channel selection.
Z pg. 50
yON/OFF Button turns on and off the playback
effect. Z pg. 28
uDAILY Button enables timer recording of daily
serials. Z pg. 19, 21
iWEEKLY Button enables timer recording of
weekly serials. Z pg. 19, 21
o‰ Button engages timer-standby mode.
Z pg. 19, 21
pAUX Button selects recorder's auxiliary input
mode. Z pg. 40, 42
QDATE +/– Button inputs date of programme for
timer recording. Z pg. 20
WTV PROG +/– Button — same as button on
recorder. Z pg. 15
EVHS Button enables operations on VHS deck.
Z pg. 12
RDV Button enables operations on DV deck.
Zpg. 12
TFast Forward [FF] Button — same as button on
recorder. Z pg. 12, 13
YPlay Button — same as button on recorder.
Z pg. 12, 13
UPause Button — same as button on recorder.
Z pg. 13
I
@
#
Button initiates functions such as Index
Search Z pg. 29, variable-speed search, frame
by frame playback. Z pg. 13
TV +/–Button controls volume of connected
TV. Z pg. 50
OR.A. EDIT Button accesses R.A. EDIT screen.
Z pg. 36
PIN/OUT Button registers edit-in or edit-out
point for Random Assemble Editing. Z pg. 36
aJOG/SHUTTLE Button enables use of the
remote control's JOG dial/SHUTTLE ring.
Z pg. 13
sSHUTTLE Ring performs forward and reverse
slow-motion and search during Still or Play
mode. Z pg. 13
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets and satellite
receivers of JVC and other brands. Z pg. 50, 51.
●Point the remote control toward the sensor window.
●The maximum operating distance of the remote control
is about 8 m.
NOTES:
●
When inserting the batteries, be sure to insert in the
correct directions as indicated under the battery cover.
●
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.