SET UP menu

DECODER (EXT-2)

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the decoder power

2Display the scrambled TV channel on the TV

Even if the decoder is working, a scrambled picture appears.

3Display the SET UP menu and choose DECODER (EXT-2)

SET UP

AUTO PROGRAM

 

EDIT/MANUAL

 

PICTURE TILT

 

DECODER(EXT-2)

OFF

EXT SETTING

 

ATTENUATOR

OFF

OK

D0029-EN

4Press the 5buttons to choose

ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the 5buttons to choose OFF.

5Press the a button to complete the setting

The T-V LINK menu appears.

T-V LINK

DOWNLOAD TV RECORDING DEVICE

OK

EXIT

D0005-EN

You can send the programme numbers data to a VCR with the T-V LINK function.

6Turn on the VCR, and then press the a button to transmit the data to recording device

The T-V LINK menu disappears once the data transmission ends.

7If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 to 6

If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

•Has the decoder been connected to the VCR properly according to the VCR and decoder instruction manuals?

•Has the decoder power been turned on?

•Can the TV channel be unscrambled with a decoder?

•Do you need to change the recording device settings in order to connect the decoder? Confirm that the VCR is set properly by rechecking the VCR instruction manual.

41