Setting up your TV

Caution

• Turn off all the equipment including the TV before connecting anything.

Connecting the aerial

•The connecting cables are not provided.

•For further details, refer to the manuals provided with the devices to be connected.

„If you connect via a device with an

antenna terminal such as a VCR, follow A → B → C in the diagram opposite.

„If you connect the antenna directly to the TV, follow 1.

To use the T-V LINK functions, you must have a T-V LINK compatible VCR connected by a SCART cable C to the EXT- 2 terminal on the TV. For details about T-V LINK functions, see “T-V LINK functions” on page 11.

•To connect more equipment, please see “Connecting external equipment” on page 53.

•To connect additional audio equipment, see “Connecting speakers/amplifier” on page 55.

•If you connect a decoder to a T-V LINK compatible VCR, set the DECODER (EXT-2) function to ON. For details, see “DECODER (EXT-2)” on page 41. Otherwise, you will not be able to watch scrambled channels.

•When receiving Digital terrestrial broadcasting (DVB-T), reception can suddenly be lost if the signal becomes weak. Use a correctly installed high- performance antenna.

•When connecting via a device with an antenna terminal such as a VCR, depending on the connection method, the signal may be weakened. If this happens, use a booster to increase the signal strength.

•In areas with a lot of radio communication such as near ports or airports, noise may be introduced into the picture or sound. In such cases, reception may be improved by using a high-performance antenna.

•Read the instruction manual of the devices which you connect to the TV.

For example

 

Back of the TV

Aerial

75-ohm Coaxial Cable

EXT- 4

 

 

 

 

EXT-1

Pb

L

 

 

 

EXT-2

Pr

R

S

 

 

EXT-3

 

 

S

 

L

 

 

 

AUDIO OUT

 

R

 

21-pin

75-ohm

SCART

Cable

Coaxial

 

Cable

VCR

To Aerial

Input

To Aerial

AV IN/OUTOutput

Terminal

7