Additional preparation

Surround speakers 1:

Connect surround speakers to the TV when you want to use the DOLBY SURROUND function to enjoy surround sound.

•Even without surround speakers, you can easily enjoy surround sound by using the 3D-PHONIC function.

•Use 8-ohm impedance type speakers.

•Pay attention to the positive (+) and negative (-) polarities when connecting surround speakers to your TV.

•For the best effect, position the surround speakers at least 1 metre above the heads of seated viewers.

Front speaker system (Front L/R speakers 2 and amplifier 3):

You can use your hi-fi audio system speakers instead of the TV speakers.

Subwoofer system

(Subwoofer 4 and amplifier 5): Using the subwoofer system improves the playing performance of low sounds.

•It is particularly effective with the low frequency effects (LFE) included in 5.1-channel Dolby Digital surround sound.

•When a front speaker system and/or subwoofer system is connected, listen to the sound from the connected equipment. Depending on the settings, it may not be possible to hear the sound using just the TV speaker. To listen to the sound from the TV speaker without using the connected equipment, change the settings with one of the following.

-Set the SOUND SETTING SPEAKER to ON, or

-Set the SURROUND FEATURES 3D-PHONIC or DOLBY SURROUND TV SPEAKER to “L/

C/R”.

To listen to the sound from the connected equipment after changing the settings, change the settings back to match the connected equipment.

L R

SUB

 

WOOFER R

L

AUDIO OUT

L R

SURROUND

REAR

Back of the TV

1

2

3

L R

Approx.

45 degrees

L R

Positioning of speakers

53