SET UP menu

LANGUAGE

The LANGUAGE setting which was performed in the “Initial settings” (page 6) can be changed.

1Choose LANGUAGE, then press the aor 3button

A sub-menu of the LANGUAGE function appears.

> LANGUAGE

OK

D0002(E)-EN

2Press the 5and 6buttons to choose a language. Then press the abutton

PICTURE TILT

There are cases where the Earth’s magnetic force may make the picture tilt or make unnatural colours appear in the corner of the screen. If this happens, you can correct it.

1Choose PICTURE TILT, then press the aor 3button

The sub-menu of the PICTURE TILT function appears.

>> PICTURE TILT

OK

D0018-EN

2Press the 6buttons until the picture becomes level. Then press the abutton

DECODER (EXT-2)

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the decoder power

2Display the scrambled TV channel on the TV

Even if the decoder is working, a scrambled picture appears.

3Display the SET UP menu and choose DECODER (EXT-2)

SET UP

AUTO PROGRAM

 

EDIT/MANUAL

 

LANGUAGE

 

PICTURE TILT

 

DECODER(EXT-2)

ON

EXT SETTING

 

OK

D0029-EN

4Press the 5buttons to choose

ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the 5buttons to choose OFF.

5Press the abutton to complete the setting

The T-V LINK menu appears.

T-V LINK

DOWNLOAD TV VCR

OK

EXIT

D0005-EN

You can send the programme numbers data to a VCR with the T-V LINK function.

35