Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Installation Instructions Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

■Turn the unit OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

2

Page 1 Page 3
Page 2
Image 2
GE ASQ18, ASM14*, ASM24* Consumer Support Troubleshooting Tips, Do not use an adapter plug with this appliance
Page 1 Page 3

ASQ18, ASM24*, ASM14* specifications

GE ASM14*, ASQ18, ASM24* are part of General Electric's advanced suite of air compressor technologies designed for energy efficiency and reliability. These models cater to various industrial applications that require compressed air solutions, offering distinct features that enhance operational performance.

The ASM14* model is engineered with advanced airend technology, which ensures increased efficiency and reduced power consumption. This results in lower operational costs while providing consistent airflow. It employs a robust design that minimizes maintenance needs, making it a preferred choice for industries looking for reliable performance without frequent downtime.

ASQ18 offers high adaptability to different environmental conditions. This model features integrated variable speed drive (VSD) technology, which adjusts the compressor output based on the actual air demand. This not only optimizes energy consumption but also reduces wear and tear, extending the lifecycle of the unit. ASQ18 is perfect for facilities that experience fluctuating air requirements and emphasizes sustainability through reduced energy usage.

Similarly, the ASM24* model brings impressive capabilities to the table, particularly in terms of airflow and pressure characteristics. Its compact design allows easy integration into existing setups, and it boasts a low noise level, making it suitable for various applications where noise reduction is critical. This model incorporates easy-to-access components that simplify maintenance, ensuring operational continuity.

All three models utilize advanced monitoring technologies, providing real-time data on performance and operational health. This enables users to make informed decisions regarding maintenance schedules, ultimately enhancing productivity. Additionally, GE’s commitment to incorporating smart technologies ensures compatibility with predictive maintenance systems, allowing for proactive issue resolution.

In summary, the GE ASM14*, ASQ18, and ASM24* compressors stand out for their commitment to efficiency, sustainability, and reliability. With their advanced engineering, they cater to diverse industrial needs while helping businesses minimize operational costs and enhance productivity. Choosing these models means capitalizing on GE's legacy of quality and innovation in the compressed air sector.
Top Page Image Contents