Window Installation Instructions
1WINDOW REQUIREMENTS
•These instructions are for a standard
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
171⁄2″ min.
281⁄2″ to 391⁄4″
(With accordion panels)
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.
To adjust for this, attach a piece of wood to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame or the vinyl frame.
Attach securely with nails or screws provided by the installer.
3REMOVE THE FRONT GRILLE (IF ATTACHED)
ARemove shipping tape, if present. On models with a
lift it and remove the screw behind it (if present) that holds the grille in place.
On models with a
B Gently but firmly grasp
the lower grille corners, press in on the case sides and pull forward
to release.
NOTE: Do not pull the bottom edge toward you more than 3″ or
you may damage the tabs of the grille.
CLift the grille up and off the top tabs.
1/2″ higher than storm window frame
Storm window frame
1/2″ higher
than vinyl frame (on some windows)
Wood
Stool
Vinyl frame
11