![Troubleshooting](/images/new-backgrounds/25594/2559463x1.webp)
Troubleshooting
This section is designed to help you solve possible problems you might encounter. Common questions and answers regarding installation and connection are listed below for your reference. In case these pointers do not solve the problem please contact your dealer or Klegg Customer Enquiries for further assistance.
Problem | Cause | Remedy |
No Sound | Speaker not properly connected | Check cables for shorts |
|
| or open connections |
| Incorrect input mode | Select proper audio |
|
| source (Digital or |
| Amplifier is off/malfunction | Analog) |
| Check your amplifier | |
| Speaker defective | |
| Refer to speaker | |
|
| |
|
| documentation |
Weak sound | Volume control down | Turn up volume control |
| Speaker cable shorted or has | Check cables |
| broken strands |
|
Buzzing sound | Speaker cable (wire) shorted | Check cable wiring |
| Mains power interference | Check power cable is not |
|
| running next to speaker |
|
| cables. Connect power |
|
| adapter to different wall |
|
| socket. |
| Defective speaker | Refer to speaker |
|
| documentation |
No balance control | Check balance control setting | Adjust balance control |
Excessive | Speaker out of circuit | Check speaker |
highs or lows |
| connections |
| 31 |
|