M6 501P Remote Control
| 9 | 6 |
|
2 |
|
| power |
|
| 1 | |
mute |
|
|
|
4 |
|
| 3 |
balance |
| delay | prologic |
7 |
|
| 5 |
field | EQ on/off | EQ setup | |
10 |
|
| 8 |
preset 1 | preset 2 | preset 3 |
|
| 11 |
save | preset 4 | load |
12 |
| 13 |
15 |
| Cen |
| 14 | |
SL/SR |
| SW |
DRC | VOL | D Time |
|
|
18 |
|
19 | 17 |
| 16 |
1.POWER Button On/Off key.
2.INPUT MODE Button Select from 5 different source inputs.
3.TEST Button
5.1channel test tone activation.
4.MUTE Button Temporarily disable signal output.
5.PROLOGIC Button
Select up to 4 different surround ettings.
6
7
8
9
10
11
12
13
14
15
16
17
18
19
DELAY Button
Select the desired channel to adjust the time Delay.
BALANCE Button
Volume settings for all 6 channels.
EQ SETUP Button
Select up to 5 EQ Band Settings* (see page 11).
EQ ON/OFF Button
Activate the selected EQ Band Setting.
FIELD Button
Choose from 6 different sound fields.
PRESET Button (P1, P2, P3, P4) Store up to 4 different user settings.
SAVE Button
Store user settings into a selected preset.
LOAD Button
Activate user settings stored in selected preset. SPEAKER ON/OFF Buttons (CEN, SL/SR, SW) These 3 buttons switch the center speakers, SL/SR speakers and subwoofer on and off. CEN Button allows you to activate/deactivate the center channel speaker.
LS/RS Button lets you simultaneously activate/deactivate the left and right surround speakers.
SW Button is used to activate/deactivate the subwoofer.
BASS MANAGER Button
Switches among three bass configurations (bass config. 1, bass config. 2 and bass config. 3).
VOL + and VOL – Increase/decrease the volume.
D TIME Button Increase/decrease the delay time.
DRC Button
Choose from 3 different compression ratios of the dynamic range.
RESET Button
Press this button to reset the system to its factory default settings.
12