![Delay Calibration](/images/new-backgrounds/25594/2559441x1.webp)
M6 501P Operation – Time Delay Adjustment of Center Channel Speaker
|
|
| Delay Calibration | |
balance | delay | prologic | Press the DELAY Button to select the length of | |
field | EQ on/off | EQ setup | delay time for SL/SR/C channels. Repeatedly | |
pressing the DELAY Button will allow you to | ||||
|
|
| ||
preset 1 | preset 2 | preset 3 | choose from the 3 surround speakers (SL, SR, C.) | |
save | preset 4 | load |
| |
|
| Cen | The delay time range for SL/SR is 0 to 15 ms and | |
SL/SR |
| SW | 0 to 5 ms for Center. | |
|
| |||
DRC | VOL | D Time | Adjust the delay time on the selected channel by | |
|
| |||
|
|
| ||
|
|
| pressing D TIME + or D TIME - on the remote | |
|
|
| control. |
Press the DELAY Button and the M6 501P will display the current delay time for channel LS.
D o | l b y | D i g | i t a | I | C o |
D E | L A Y | S | L 5 |
| m s |
Press the DELAY Button again and the M6 501P will cycle to next channel.
D o | l b y | D i g | i t a | I | C o |
D E | L A Y | S | R 5 |
| m s |
|
|
|
|
|
|
Press the D TIME + or D TIME - button and the M6 501P will increase or decrease the delay time for the current channel.
D o l b y | D i g | i t a | I | C o |
D E L A Y | S | R 6 |
| m s |
|
|
|
|
|
20