1.After properly connecting M6 501P to your audio sources and amplifier, plug in M6 501P’s AC adapter to an AC outlet.
2.Activate the M6 501P power by pushing the POWER Button on the front panel. Then, turn on the power for all audio sources, amplifier, and/or powered subwoofer.
3.Having completed the installation, get ready to experience true Dolby Digital or DTS surround sound right in your living room.
Note:
When playing music or movies be sure to have the volume set low initially. Gradually turn the volume up to an appropriate level after the playback has started.
EQ Band Settings for the Klegg M6 501R Home Theatre Speaker System
The M6 501P allows precise adjustment of equalizer band settings (see page 28). Since each speaker system has its own individual properties, you may wish to experiment with these settings to attain your desired output reproduction. If you are connecting the M6 501P to the Klegg M6 501R Home Theatre Speaker System, you may wish to start with an EQ Setup as follows:
??BAND 1: +8dB
??BAND: 2 +9dB
??BAND: 3 +7dB
??BAND: 4 +8dB
??BAND: 5 +9dB
These are settings are for general guidance only. The acoustics of your own living room and desired listening levels will mean your own set up will provide the best results.
11
