SET UP menu
SET UP
AUTO PROGRAM |
|
EDIT/MANUAL |
|
LANGUAGE |
|
PICTURE TILT |
|
ON | |
COMPONENT AUTO SELECT | ON |
EXT SETTING |
|
OK
AUTO PROGRAM
You can again perform the AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” (page 6).
To receive SKY 1 you need a satellite tuner. You must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function.
1Choose AUTO PROGRAM, then press the aor 3button
The COUNTRY menu appears as a sub- menu of the AUTO PROGRAM function. There are two COUNTRY menus. Pressing the yellow button changes the COUNTRY menu as follows:
> COUNTRY
START
OK 
MORE
> COUNTRY
START
OK
MORE
2Press the 5and 6buttons to choose the country where you are
3Perform steps 5 and 6 of the “Initial settings” (page 7)
EDIT/MANUAL
The EDIT/MANUAL functions are divided into two types:
•editing the current programme numbers (PR) (EDIT functions); and
•manually storing a TV channel you want to view on a particular programme number (PR) (MANUAL function).
Here are the details about these functions:
MOVE:
This function changes the programme number (PR) of a TV channel.
ID:
This function registers a channel name (ID) to a TV channel.
INSERT:
This function adds a new TV channel in the current programme numbers (PR) list by using the CH/CC number.
•You cannot use the INSERT function if you do not know the channel number of a TV channel. Use the MANUAL function to register a TV channel in the programme number (PR).
DELETE:
This function deletes a TV channel you do not want to list.
MANUAL:
This function manually stores a new TV channel in a programme number (PR).
Caution
•Using the MOVE, DELETE or INSERT functions rewrites the current programme numbers (PR) list. Therefore, the programme numbers (PR) of some of the TV channels will change.
•Using the MANUAL function for a TV channel for which the CHILD LOCK function has been set cancels the CHILD LOCK function for that channel.
•Using the MANUAL function for a TV channel for which the DECODER
33