Teletext function
VCR/TV/
DVD
Basic operation
1Choose a TV channel with a teletext broadcast
2Set the VCR/TV/DVD switch to the TV position
3Press g (Text) button to display the teletext
Pressing g(Text) button changes the mode as follows:
| TEXT |
| TEXT |
TV mode | TV and text mode |
TEXT |
|
TEXT |
|
D1043 | Text mode |
4Choose a teletext page by pressing the ppbuttons, number buttons or colour buttons
To return to the TV mode:
Press the bbutton or g(Text) button.
•If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station.
•The ZOOM function will not work in the TV and text mode or Text mode.
•You cannot operate the TV’s menu when viewing a teletext programme.
•Language display depends on the country which was set on the COUNTRY menu. If characters on a Teletext programme do not appear properly, change the COUNTRY setting to other country’s. To change the COUNTRY setting, perform steps 1 and 2 of the “AUTO PROGRAM” procedure on page 33 and then press the abutton.
The last teletext page displayed is memorised. The last teletext page is cleared by:
•turning the power off
•changing the channel
•switching the TV input
Using the List Mode
You can store the numbers of your favourite teletext pages in memory and call them up quickly using the colour buttons.
To store the page numbers:
1Press Bbutton to go into the List mode
The page numbers you have stored are displayed at the bottom of the screen.
21