6
Setting up your TV
•The AUTO PROGRAM function does not store a TV
channel to the programme number 0 (AV).
5 If you do not need to use the EDIT/
MANUAL function, press the MENU/OK
button to close the EDIT menu.
5 Adjusting CRT colour convergence
This TV has three color projection tubes : one for
red, one for green and one for blue. When mixed
together in the proper proportion, the output of
these three colour tubes can produce any colour.
To produce these colour, however, the beams must
be precisely aligned over each other so that the
colours can be mixed. The produce of aligning
these picture beams is called “convergence”.
•Colours may become saparated after the TV has
been moved, or over a long period of time if
regularly subjected to low level vibrations.If the
colours become saparated, please perform the
ajustment below again.
1 Press the MENU/OK button.
The main menu appears.
PICTURE SETTING
PICTURE FEATURES
SOUND SETTING
FEATURES
INSTALL
MENU
:EXIT
:OK
OK
TV
:BACK
DISP
2 Press the
/
buttons to choose PICTURE
FEATURES menu. Then press the MENU/
OK button.
DIGITAL VNR
DigiPure
PULL DOWN
COLOUR SYSTEM
ZOOM
DIGITAL CONVERGENCE
AUTO
AUTO
AUTO
PICTURE FEATURES
:EXIT
:OK
OK
TV
:BACK
DISP
3 Press the
/
buttons to choose DIGITAL
CONVERGENCE. Then press the MENU/
OK button.
The convergence adjustment screen
appears with crosses (+) displayed in 9 locations.
Before the convergence
is adjusted After the convergence
is adjusted
Locations where the crosses appear in 3 colours:
Convergence adjustment is required. Perform
steps 4 and 5.
Locations where the crosses are white:
The convergence is adjusted correctly.
•If all the crosses are white, no convergence
adjustment is needed.
4 Use the number buttons on the remote
control to select the location to be
adjusted.
The locations of the crosses correspond to the
positions of the number buttons on the remote
control. A box appears around the selected cross.
1 2
4 5 6
7 8 9
3
5 Adjust the three coloured crosses until
they overlap and appears as a single
(white) cross.
1.Press the NEXT button to change the colour of the
box to the colour of the cross you want to adjust
(red or blue).
•You cannot adjust the green cross.
2.Use the
/
and
/
buttons to adjust the
position of the cross.
To cancel the adjustments before completing the
procedure:
Press the DISPLAY button.
6 Press the MENU/OK button to end the
convergence adjustment procedure.
• If you do not use the TV controls for roughly one
minute, the convergence adjustment screen
automatically disappears.
Now, the setting up is complete.
Please enjoy your new JVC TV!
LCT1078-001A_p01-15 11/2/01, 2:12 PM6
Black