Connecting Other Equipment
You can connect an external audio component used only as a playback device.
Canceling the Demonstration
When connecting the AC power cord to a wall outlet, the unit automatically starts demonstration.
•DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
To connect an external audio component
Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.
To cancel the demonstration, press and hold CANCEL/DEMO until “DEMO OFF” appears on the display.
•To cancel only beep sounds during the demonstration, press and hold BEEP for more than 2 seconds or press BEEP ON/OFF on the
remote control.
The BEEP ON indicator goes off from the display.
CANCEL
/DEMO
|
|
|
| T |
|
|
|
| U |
|
|
|
| N |
/BEEP |
| I | ||
| N | |||
|
|
|
| G |
|
|
|
|
|
BEEP
ON/OFF
FADE
MUTING
To play external audio component through this unit,
connect between the audio output jacks on the other equipment and AUX jacks by using an audio cord (not supplied).
When you press other buttons |
The demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) unless you cancel it by pressing CANCEL/DEMO.
Audio equipment
To audio output
To start demonstration manually
Press and hold CANCEL/DEMO again until “DEMO START” appears on the display.
Now, you can plug the AC power cord.
IMPORTANT: Be sure to check that all connections are done before plugging the AC power cord into a wall outlet.
8
