INSTALLATION

●The same installation procedure applies to all Input Cards.

●If the Input Card is installed correctly, your Monitor will automatically recognise it.

●Refer to the user manual provided with your Multi-Format Monitor or Color Video Monitor for details on adjustment or setting of input signals via the Input Card.

PREPARATIONWhen using the IF-C21SDG, IF-C51SDG, IF-C21HSDG, or IF-C51HSDG:

Depending upon the monitor in which the card is inserted, it may be necessary to set the DIP switches on the Input Card. See page 7 “DIP SWITCHES” for details.

•Wear gloves to protect your hands from metal parts on the Input Card’s board.

•You will need a 6 mm Phillips screwdriver.

•Turn off the Monitor’s main power and unplug the power cable from the AC outlet.

CAUTIONS

•Do not touch the terminal connected to the monitor or board pattern. (Doing so may produce static electricity that will damage the Input Card.)

•Do not remove slot covers from the monitor’s slots if they are not in use.

•Do not force the Input Card into the monitor’s slot.

INSTALLATION PROCEDURE

1.Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which the card is to be installed.

2.Insert the Input Card board (green) into the slot, fitting the board into the guide rails at the top and bottom of the slot.

3.Push the Input Card in so that its front panel touches the rear panel of the monitor. (Insert the Input Card while holding the knobs at top and bottom).

4.Secure the Input Card by replacing the screws removed in Step 1 above.

●Make sure the Input Card is correctly installed by checking “SLOT CONDITION” on the Main Menu of the Multi-format Monitor. (Also refer to the Multi-format Monitor instruction manual.)

●Press the INPUT SELECT button on the color video monitor to make sure that the Input Card is correctly installed. (Also refer to the Color Video Monitor instruction manual.)

REMOTE

Slot cover

Rear side of multi-format monitor

Fit board to guide rails

Knob

REMOTE

 

Guide rails

Knob Input Card

(illustration shows

the IF-C12HSDG)

REMOTE

2