JVC S101, Note, CAUTIONS, switches, CAUTIONS, Using the Switches, DIP switch settings, the description for each setting, OFF as required in accordance with

DIP SWITCHES

(required only for IF-C21SDG, IF-C51SDG, IF-C21HSDG, IF-C51HSDG)The following settings are required when the input cards noted above are used.Embedded Audio audio channel selection.

Audio Level Meter function display/hide, and various settings (required only for IF-C51HSDG and IF-C51SDG).

Operation from the monitor is not possible if it does not support menus and buttons as required for entering settings. In this case the DIP switches on the Input Card are used to enter the settings before the card is inserted in the monitor slot.

CAUTIONS

•Do not touch the DIP switches if the monitor supports the menus and buttons as required for entering settings. Operation from the monitor is not possible if the DIP switches are used. When using an Input Card on which some of the switches have been set to ON, set switches 1 and 16 to OFF.

•The DIP switch settings cannot be changed once the Input Card is inserted in the monitor.

	DIP switch S101					Two DIP switches are used - S101 is located at
						the top of the connection terminal, and S102 at
						the bottom.
						Settings are entered by setting the switch with
			1	O
					1	the appropriate number (1 to 16 at the right
			2	N	2	edge of the board) to ON or OFF as required.
		S101	3		3
			4			Note
			5
						•	The numbers 1 to 8 on DIP switch S101 are
			6		456
							associated with the numbers 1 to 8 on the board.
			7
					7
			8		8		The numbers 1 to 8 on DIP switch S102 are
							associated with the numbers 9 to 16 on the board.
						•	A switch is ON when set to the right, and OFF when
Connection terminal							set to the left. The diagram at left shows all switches
(inserted into slot)							OFF (as set prior to shipment from the factory).
						•	Leave switch 15 OFF at all times.
						Using the Switches
						1. Remove the film covering the DIP
							switches.
Switch numbers
					9	2. Set switches 1 to 16 to ON to enable
			1	O	10		DIP switch settings.
			2	N	11
			3					Switch number
		S102	4		1312		Setting
								ON	ON
			6				Enable DIP switch
			5					1	16
			7
					14		Disable DIP switch	OFF	OFF
			8
					15	3. Set the necessary switches ON or
							OFF as required in accordance with
					16
							the description for each setting.

ENGLISH

7