JVC JLC42BC3002, JLC47BC3002-B Channel Menu, Select Antenna / Cable, Auto Scan Channels

Adjusting the Menu Settings

Channel Menu

Select Antenna / Cable

Select Antenna or Cable depending on which you have attached to your TV.

1Press MENU.

2	Press	or	to select “Channel”, then press	or OK.
3	Press	or	to select “TV Mode”, then press	or OK.
4	Press	or	to select “Antenna” or “Cable”, then press OK.

Scan Channels

Auto Scan Channels

TV Mode	Cable
Auto Channel Scan
Partial Channel Scan
Find Channel
Channel Management
Digital MTS	English

The TV is equipped with a channel memory. When you run auto scan, the TV scans for channels with network signals and memorizes them into memory. It may take 15 to 30 minutes to memorize digital cable channels depending on the reception condition.

1

2

3

Press MENU.
Press	or	to select “Auto Channel Scan”, then press or OK.
Press	or	to select “Start Scan”, then press OK.

Scanning progress is displayed on the menu screen. To stop scanning, select “Stop Scan” and press

OK.

Partial Scan Channels

You can partially scan for network signal within a speciange of channels.

1Press MENU.

2Press or to select “Partial Channel Scan”, then press or OK.

3	Press	or	to select “Scan Mode”, then press or OK.
4	Press	or	to select an option, then press OK

t“Analog/Digital”: scan for both analog and digital channels

t“Analog”: scan for analog channels

t“Digital”: scan for digital channels

5Press or to select “From Channel”, then enter a starting channel range.

6Press or to select “To Channel”, then enter an ending channel range.

7 Press or to select “Start Scan”, then press OK.

Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.

34